Earthle Earthing Alligator Clip - Manual

Use of the alligator clip:

1. Remove the alligator clip, cable, hose clamp, and tie wrap from the packaging.:

2. Attach the alligator clip to the cable and then to a metal radiator pipe, radiator, or metal coupling. Ensure the clip makes contact with an unpainted metal surface. If necessary, you can carefully scrape a little paint off the back of the pipe – this remains invisible and only needs to be minimal. Below are three ways to make the attachment: directly on the hose clamp, under the hose clamp, or with the included tie wrap:

3. Connect the end of the grounding cable to one of the Earthle grounding products:

4. Radiators and their metal pipes are grounded via the boiler or heating system. Thus, a (grounded) outlet is not needed:

5. 30 to 40 minutes per day of contact with the grounding products (via the alligator clip) is enough to experience the healing process of ‘grounding’. There is no such thing as too much grounding.

Click here to order the alligator clip. Questions? Check out here our FAQ page or click here to contact us.