Earthle Earthing Pillowcase (71x51cm) - Manual

Using the grounding pillowcase:

1. Remove the pillowcase from the packaging:

2. Insert your pillow into the pillowcase:

3. Connect the end of the grounding cable to the grounding button on the pillowcase:

4. Plug the grounding cable into a grounded outlet (also works on grounded outlets in Belgium, France, and Denmark). No grounded outlet at home? Then order our grounding pin to still ground indoors (without an outlet):

5. Optionally use an extra pillowcase over it, but preferably make direct skin contact with the Earthle Earthing Pillowcase for the best effect:

6. 30 to 40 minutes of contact with the pillowcase per day is enough to experience the healing process of 'grounding.' A night's sleep is therefore more than sufficient. Too much grounding does not exist.

How do you wash the pillowcase?

The pillowcase is made of 95% cotton (100% organic) and 5% silver fibers. You can wash the pillowcase as often as you like at 40° in the washing machine (occasionally at 60° if there are stains), with a detergent without chlorine bleach. Tumble drying is possible (on the lowest setting), but preferably let it dry without a dryer to make the pillowcase last longer.

How do you know if an outlet is grounded?

A grounded outlet contains, besides the two holes, two metal pins, one at the top and one at the bottom of the outlet. In an ungrounded outlet, you only see the two holes where you insert the plug. Below is an image of a grounded and ungrounded outlet.

Click here to order the grounding pillowcase. Questions? Check out here our FAQ page or click here to contact us.